Are you still worried about the blockage of the slurry pump? Let's teach you a few tricks to solve the slurry pump blockage problem!
Slurry pump blockage mainly has the following 5 reasons:
The density of the medium is not uniform. The uneven density of the medium causes vibration when the pump is just started, when the pump is normally
opened, the vibration of the pump will disappear, this situation does not need to be dealt with, just before driving, pay attention to the medium with high
pressure wind.
Pump installation is not level. The pump body level should be checked during installation and operation.
Cavitation makes the impeller of the pump unbalanced. The installation height should be lowered, and the outlet valve should be reduced to reduce the inlet
resistance.
Uneven intake of suction tube. The feed condition of the pump should be improved to strengthen the uniform stability of the intake air.
Pump bearing clearance is large. The bearing clearance is too large to cause the pump vibration, in the daily equipment operation should always pay attention
to observe the situation of the pump, find that the pump shaft and motor shaft different heart or bearing damage should be dealt with in time.
Only by finding the cause, can the right medicine be used to better solve the problem of slurry pump blockage. It is hoped that these methods can help us better
deal with the problem of slurry pump clogging.
Next: The difference between single-shell pumps and double-shell pumps