Hello,Welcome To Shi Jia Zhuang Pansto Pump Co.,Ltd!

+086-13363833280 1245738092@qq.com

NEWS  |   NEWS
What are the factors to be considered in the selection of slurry pump?

NewsTime: 2023-11-17

1. Comprehensive consideration of equipment placement, terrain and water level conditions, work and economic plan comparison and other factors, for you to 

select the most suitable horizontal, vertical and other types (pipe type, right Angle type, variable Angle type, corner type, parallel type, straight type, upright type, 

submersible type, disassembly type, liquid type, non-blocking type, self-priming type, gear type, oil-filled type, water temperature type) pump. The horizontal 

pump is easy to install and disassemble, easy to manage, but the volume is larger, the price is more expensive, and the floor area is larger; The vertical pump is 

compact, the installation area is small, and the price is economical.

2. According to the nature of the liquid medium, choose clean water pump, hot water pump, oil pump, chemical pump or corrosion resistant pump or impurity 

pump for you, or choose non-blocking pump.

3. For the pump installed in the blasting area, explosion-proof motors should be selected according to the grade of the blasting area.

4. According to the amount of vibration is divided into pneumatic and electric (electric is divided into 220v voltage and 380v voltage), choose the most suitable 

pump for you.

5. According to the flow size, choose single suction pump or double suction pump for you; According to the height of the head, for you to choose single suction 

pump or multi-suction pump, high speed pump or low speed pump (air conditioning pump), multi-stage pump power is lower than single-stage pump, elected 

single-stage pump and multi-stage pump can be used, it is appropriate to choose a single-stage pump.

6. According to the specific model and series of slurry pump, determine the specific model on the type spectrum or series characteristic curve, while considering 

the two main parameters of large flow rate and the head after expanding 5%-10% margin.



Our products and services will bring you more value, welcome to contact us!



Prev: What is caused by the vertical slurry pump without water
Next: Slurry pump motor starting mode